UHF Female Flange Mount Straight Connector For Rear Bulkhead

UHF Female Flange Mount Straight Connector For Rear Bulkhead Specification

Operating Temperature
-55C to +155C

Weight
Approx. 15g

Install Type
Flange mount with rear bulkhead

Core Number
1

Locking Type
Threaded coupling, screw mount

Dielectiric Strength
1500V RMS min.

Cable Type
Coaxial cable interface

Number of Conductor
1

Impedance
50 Ohms (typical)

Diameter
16mm (barrel body)

Insulation
PTFE

Conductor Type
Single pin

Core Material
Brass

Features
Rear bulkhead mounting, flange mount, RF signal transmission, corrosion-resistant, robust construction

Usage & Applications
Bulkhead mounting for RF/coaxial connection, outdoor/indoor equipment

Conductor Shape
Round

Rated Temperature
-55C to +155C

Tensile Strength
High mechanical strength

Product Type
UHF Female Connector, Flange Mount, Straight

Voltage
Up to 500V RMS (typical)

Insulation Material
PTFE (Polytetrafluoroethylene)

Application
Radio frequency cable connection, antenna systems, amateur radio, broadcasting equipment

Conductor Material
Brass (gold or silver plated pin)

Storage Temperature
-55C to +155C

Connector Color
Silver

Shield Material
Nickel-plated brass body

Dimension (L*W*H)
Approx. 25mm x 25mm flange, 20mm height

Color
Silver/White Insulator

Material
Nickel-plated brass

Size
Flange size approx. 25mm x 25mm

Mounting Method
Four-hole square flange, rear panel mounting

Frequency Range
DC to 300 MHz (optimal performance)

Flange Hole Diameter
3.2mm (each mount hole)

Contact Plating
Gold or silver plated (center pin)

RoHS Compliance
Yes

VSWR
<1.3 @ 300 MHz

Weatherproof
Moderate, for indoor/outdoor protected use

Mating Cycles
>500 cycles

Contact Resistance
1.5 m max (center contact), 1.0 m max (outer contact)

Standards
Conforms to MIL-C-39012

UHF Female Flange Mount Straight Connector For Rear Bulkhead Trade Information

Minimum Order Quantity
5 Pieces

Main Domestic Market
All India

About UHF Female Flange Mount Straight Connector For Rear Bulkhead

Description: UHF Connector, Female, 4 Hole Flange,Straight/180, Rear Bulkhead, Cable

Features:

UHF Connector, Female, 4 Hole Flange, Straight/180, Rear Bulkhead, Cable;
Designed for low frequency systems from 0.6-300MHz;
Threaded coupling mechanism is easy for assembly with high durability;
From the OEM Original Factory, same quality with much better price.

Appliance:

Antennas, Military, Public Address Systems and Low-frequency applications

Superior Material & Construction

Crafted from nickel-plated brass with a gold or silver-plated brass conductor, the UHF flange mount connector boasts excellent corrosion resistance and robust mechanical strength. The use of PTFE insulation ensures stable electrical performance across a wide temperature range, from -55C to +155C, making it suitable for demanding environments.

Versatile Applications

This connector is tailored for bulkhead mounting in RF equipment, suitable for indoor and outdoor protected setups. Its reliable design is widely utilized in radio broadcasting, antenna installations, amateur radio, and other professional audio-visual systems that demand stable coaxial cable interfacing.

Reliable Performance Standards

Conforming to MIL-C-39012 and RoHS specifications, this connector guarantees consistent, safe, and environmentally responsible usage. Its VSWR of less than 1.3 at 300 MHz and over 500 mating cycles assure dependable signal transmission and long-lasting service even under rigorous operational conditions.

FAQs of UHF Female Flange Mount Straight Connector For Rear Bulkhead:

Q: How is the UHF Female Flange Mount Straight Connector installed using the four-hole flange method?

A: The connector is installed by aligning its four-hole square flange to the rear panel of the mounting surface. Each 3.2mm diameter mount hole accommodates screws that securely fasten the connector in place, ensuring a stable and vibration-resistant attachment for RF signal transmission.

Q: What types of applications are best suited for this connector?

A: This connector is ideal for radio frequency cable connections in broadcasting equipment, antenna systems, amateur radio, and other indoor or protected outdoor RF/coaxial applications where reliable, low-loss signal interfacing is required.

Q: When should I use the rear bulkhead mounting feature?

A: The rear bulkhead mounting design should be used when you require a durable connection passing through a panel or enclosure, ensuring the connector is securely anchored to the equipment or station wall for protected installations.

Q: Where can this connector be effectively utilized outdoors?

A: It is suitable for outdoor environments provided the installation area offers protection from direct exposure to weather conditions. Typical examples include covered broadcast towers, protected radio shacks, and weather-shielded equipment housings.

Q: What are the benefits of PTFE insulation in this connector?

A: PTFE insulation provides excellent dielectric strength (up to 1500V RMS), outstanding thermal stability, and chemical resistance, ensuring reliable insulation and performance even under extreme temperatures ranging from -55C to +155C.

Q: How does its weatherproof rating affect usage?

A: The moderate weatherproofing allows the connector to withstand indoor and protected outdoor conditions, making it reliable for installations that are shielded from direct rain or heavy environmental exposure.

Q: What is the process for connecting a coaxial cable to this UHF female connector?

A: The cables center conductor is secured to the gold or silver-plated pin, while the outer conductor interfaces with the connectors nickel-plated brass body. The threaded coupling ensures a tight, vibration-resistant connection for reliable RF signal transmission.